Cudy POE200 30W Gigabit PoE+ Injector

Specifications:

Protocols	802.3 Protocols	802.3i 10 Mbps over Twisted Pair 802.3u 100 Mbps over Twisted Pair 802.3ab 1 Gbps over Twisted Pair 802.3af PoE 802.3at PoE
PoE	Uplink Stream	1× GbE
	Downlink Stream	1× GbE, 802.3at/af
	Downlink Pin Assignment	Mode A
	Transimission Distance	Cat. 5e or higher cable: 100 meters at Gigabit Note: Total cable length from the uplink switch through the PoE adapter to the downlink device is measured as one segment
Interfaces	Physical Buttons	Reset Button
	LED	Power
	Power Interfaces	AC Inlet
Power	Power Methods	AC
	Power Input	100-240V~ 50/60Hz 0.8A
	Max Power Output	30W, 54V⎓0.56A
Reliability	Power Protection	Surge Protection ESD Protection Overvoltage Protection Short-Circuit Protection
	EMC	IEC/EN 61000-4-2, Level 3 ESD: Contact: 6kV; Air: 8kV IEC/EN 61000-4-5, Above Level 4 Surge: Power: DM 4kV, CM 4kV; RJ45: CM 4kV
	Grounding Methods	Three-Prong Plug
	Environment	Ambient Operating Temperature: -10~40 ℃ (14~104 ℉) Storage Temperature: -40~70 ℃ (-40~158 ℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 10%~95% non-condensing

Add to Quote

Categories: Networking, POE Injector Tags: Cudy, Injector, POE Brand: Cudy

Description
Reviews (0)

Description

Cudy POE200 30W Gigabit PoE+ Injector – A wall-mounted PoE adapter injecting up to 30W power to the Ethernet cable to power up the PoE device. The reset button allows you to re-negotiate the connection speed without unplugging the cable.